C.A.S. IBERIA BLADES

 

PAGE LAST UPDATED 05/11/99

 

The -AM are made in Spain

The CI- are made in the Philippines

The -GT are made in China

 

 

TOLEDO DECORATOR SWORDS

 

The following swords are made in Toledo. They are ideal for costume dress and wall decoration.

 

These swords have stamp-engraved blades and wire wrapped handles. The guards and pommels of Tizona, Alfonso, Duque d'Alba and Carlos are cast in intricate detail with a black oxide finish. The guards and pommels of Colada and Pizarro are fabricated steel with a natural finish. None of the swords come with a scabbard.

 

1100-TL Sword of El Cid - Colada

1101-TL Sword of El Cid - Tizona

1102-TL Sword of the Duque d' Alba

1103-TL Sword of Pizarro

1104-TL Sword of Carlos V

1105-TL Sword of Alfonso X

 

002-SH "Sgain Dubh, stag" 8" overall and 3-3/4" blade. The knife is hilted in crown stag with a silver cabuchon. Comes with a black leather scabbard. Made in Sheffield.

 

1011-GT "Dao Sword" 31" overall with a 25" single edged high carbon spring steel blade. Has a wood handle with brass guard and pommel. Comes with a wood scabbard with brass mountings and end cap.

 

1012-GT "Dadao Sword" 38" overall and 23" single edged falchion style high carbon spring steel blade. Has a red cord wrapped handle with a brass guard. Comes with a black carry case.

 

1026-GT "Swept Hilt Rapier (China) black" 45" overall and 38" double edged hand forged high carbon spring steel blade. Handle is black. Pommel and intricate guard are black. Comes with a black scabbard.

 

1029-GT "Main Gauche (China)" 17-1/2" overall with a 14" double edged steel blade. Has a wire wrapped handle with steel guard and pommel. Comes with a sheath.

 

1031-GT "Trident" Has a 11-1/2" blade and an overall length of 18-1/2". At a touch of a button, the two spring-loaded side pieces of the split blade open up to become blade trappers. Comes with a scabbard.

 

2500-AM "Talon Dagger" 15-1/2" overall with a 10" double edged high carbon spring steel blade with fuller. Has a hardwood handle with brass guard and pommel. Comes with a brown leather belt sheath. 14th century style.

 

2501-AM "Kestrel Dagger" 15" overall and 10" double edged high carbon spring steel blade. Has a wire wrapped handle with brass guard and pommel. Comes with a brown leather scabbard.

 

2503-AM "White Shadow Dagger" 11-3/4" overall and 16-3/4" double edged high carbon spring steel blade with fuller. Has a 2-tiered wood handle, brass guard and pommel. 15th century Style. Comes with a leather scabbard.

 

3500-AM "Dagesse" 33" overall with a 26" double edged high carbon spring steel blade with fuller. Has a wood handle with a brass guard and pommel. Comes with a leather scabbard. 14th century style.

 

3501-AM "Agincourt brass" 35-1/2" overall and 27-1/4" double edged high carbon spring steel blade. Has a wire wrapped handle with brass guard and hex pommel. Comes with a brown leather scabbard.

 

3502-AM "White Knight" 35-1/2" overall and 27-1/2" double edged high carbon spring steel blade. Has a leather covered wood handle with brass guard and ring pommel. Comes with a leather scabbard. 12th/13th century style.

 

3503-AM "White Shadow" 40" overall and 30" double edged high carbon spring steel blade with fuller. Has a 2-tiered wood handle covered with leather. Guard and pommel are brass. 15th century hand and a half sword design. Comes with leather scabbard .

 

3600-AM "Wallace Sword steel" 54" overall and a 40" massive high carbon spring steel blade. Has a steel guard and pommel, leather covered grip and an extended leather covered ricasso. 13th Century design. Does not come with a scabbard.

 

3600B-AM "Wallace Sword Brass" 54" overall and a 40" massive high carbon spring steel blade. Has a brass guard and pommel, leather covered grip and an extended leather covered ricasso. 13th Century design. Does not come with a scabbard.

 

4500-AM "Black Baron" 33" overall with a 26" double edged high carbon spring steel blade with fuller. Has a black wood handle with black-chromed guard and pommel. Comes with a black leather scabbard. 14th century style.

 

4502-AM "Black Knight" 35-1/2" overall and 27-1/2" double edged high carbon spring steel blade. Has a black leather covered wood handle with black-chromed guard and ring pommel. Comes with a black leather scabbard. 12th/13th century style.

 

4503-AM "Black Shadow" 40" overall and 30" double edged high carbon spring steel blade with fuller. Has a 2-tiered wood handle covered with black leather. Guard and pommel are black chromed. 15th century hand and a half sword design. Comes with black leather scabbard .

 

6500-AM "Black Talon Dagger" 15-1/2" overall with a 10" double edged high carbon spring steel blade with fuller. Has a black wood handle with black chromed guard and pommel. Comes with a black leather belt sheath. 14th century style.

 

6503-AM "Black Shadow Dagger" 11-3/4" overall and 16-3/4" double edged high carbon spring steel blade with fuller. Has a 2-tiered wood handle, black chromed guard and pommel. 15th century Style. Comes with a black leather scabbard.

CI-001 "Crusader Sword" 37-1/2" overall and 27-1/2" double edged high carbon spring steel blade. Has an ebony handle with 2 brass rings and a brass guard and pommel. Comes with a brown leather scabbard. 13th century style.

 

CI-004 "Moro" 34" overall and 27-1/2" kris style double edged high carbon spring steel blade. Has wood handle with brass guard and pommel. Comes with a brown leather belt sheath.

 

CI-005 "Hawk Dagger" is inspired by a 13th century style. Its blade is 11-1/2" high carbon spring steel with fuller and is 17" overall. Has an ebony handle and brass guard and pommel. Comes with brown leather belt sheath.

 

CI-007 "Lord of the Rings" 45-3/4" overall and 32-3/4" massive high carbon spring steel blade. Has a 2 sectioned ebony handle with brass ring. Has a brass guard and ring pommel. Comes with a brown leather scabbard.

 

CI-014 "Scottish Claymore brass" 56-1/2" overall and 39" high carbon spring steel blade. This is a reproduction of a 16th century model. Has a Macassar ebony handle with brass guard and pommel. Does not come with a scabbard.

 

CI-015 "Bastard Sword" 51" overall and 38" high carbon spring steel blade. Has a 12" exotic hardwood handle with 11" brass guard and pommel. Comes with a brown leather belt sheath.

 

CI-020 "Hand-and-a-Half Sword brass" 38-1/2" overall and 27" double edged high carbon spring steel blade. Has a sagat hard wood handle sometimes wrapped with leather with brass guard and wheel pommel. Comes with a brown leather scabbard. 16th century style.

 

CI-023 "Flame Dagger" Has a 10" kris shaped blade of high carbon spring steel and an overall length of 16-1/2". Comes with a macassar ebony handle and brown leather scabbard.

 

CI-030 "Scottish Sword" 37-1/2" overall with a 30" double edged high carbon spring steel blade. Has a macassar ebony handle with brass guard and pommel. Comes with a black leather scabbard.

 

CI-031 "Crecy Short Sword" 29-1/4" overall and 22" high carbon spring steel blade. Has a grooved wood handle with brass guard and pommel. Comes with a brown leather belt sheath. 14th century style.

 

CI-034 "Early Dirk" Has a 13-3/4" "backed"blade (single edged with a wedge shaped cross section) made from high carbon spring steel and an overall length of 20" Comes with a macassar ebony wood handle, a brass pommel and a brown leather scabbard. Style is early 1700's, but based on much earlier designs.

 

CI-038 "Scimitar" 37" overall with a 30-1/2" curved high carbon spring steel blade. Has a hardwood handle with brass guard and hawksbill pommel. Does not come with a scabbard.

 

CI-046 "Lionheart brass" 35" overall with a 27" double edged high carbon spring steel blade. Has a macassar ebony handle with brass guard and pommel. Comes with a leather scabbard. 12th/13th century style.

 

CI-053 "Templar" 47" overall with a 34" double edged high carbon spring steel blade. It is a two handed thrusting sword in the style of the early 15th century. Has a black cord wrapped handle and brass guard and pommel. Comes with leather scabbard.

 

CI-064 "Hand-and-a-Half Dagger" 15-1/4" overall and 9-3/4" double edged high carbon spring steel blade. Has a hardwood handle with brass guard and wheel pommel. Comes with a brown leather scabbard. 16th century style.

 

CI-065 "Templar Dagger" 17" overall with a 12" double edged high carbon spring steel blade. It is a one handed thrusting dagger in the style of the early 15th century. Has a black cord wrapped handle and brass guard and pommel. Comes with leather scabbard.

 

CI-069 "War Sword brass" 41" overall and 32" double edged high carbon spring steel blade. 14th century design. Comes with wire wrapped handle, brass mace shaped pommel and a leather scabbard.

 

CI-071 "Great Sword" 54" overall with a 39" double edged high carbon spring steel blade with triple short fuller. 15th century style. Has a leather covered wood handle with brass guard and pommel. Does not come with a scabbard.

 

CI-072 "Norman Sword" 43-1/2" overall with a 35" double edged high carbon spring steel blade with fuller. Mid 12th century style. Has a leather covered wood handle with brass guard and pommel. Comes with a leather scabbard.

 

CI-073 "Black Prince" 43-1/4" overall with a 34" double edged high carbon spring steel blade. 14th century style. Has a leather covered wood handle with brass guard and pommel. Comes with a leather scabbard.

 

CI-074 "Archers Sword" 38-1/2" overall with a 31" double edged high carbon spring steel blade. 14th/15th century style. Has a wood handle with brass guard and pommel. Comes with a leather scabbard.

 

CI-075 "Henry V brass" 34-1/2" overall with a 27-1/2" double edged high carbon spring steel blade. Has a wood handle with brass guard and pommel. Comes with a leather scabbard.

 

CI-076 "Robert the Bruce Claymore" 56-3/4" overall and 41" high carbon spring steel blade. Has leather covered grip with brass rings. Ricasso is also leather wrapped. Comes with brass guard and pommel. Does not come with a scabbard.

 

CI-077 "Scottish Claymore steel" 56-1/2" overall and 39" high carbon spring steel blade. This is a reproduction of a 16th century model. Has a Macassar ebony handle with steel guard and pommel. Does not come with a scabbard.

 

CI-078 "Hand-and-a-Half Sword steel" 38-1/2" overall and 27" double edged high carbon spring steel blade. Has a sagat hard wood handle sometimes wrapped with leather with brass guard and wheel pommel. Comes with a brown leather scabbard. 16th century style.

 

CI-079 "War Sword steel" 41" overall and 32" double edged high carbon spring steel blade. 14th century design. Comes with hardwood handle, steel mace shaped pommel and a leather scabbard.

 

CI-080 "Lionheart steel" 35" overall with a 27" double edged high carbon spring steel blade. Has a macassar ebony handle with steel guard and pommel. Comes with a leather scabbard. 12th/13th century style.

 

CI-081 "Mercenary" 48" overall with a 35" double edged high carbon spring steel blade with triple fuller. Has a wood handle with steel S-curve guard and scent stopper pommel. Comes with a leather scabbard. 12th/13th century style.

 

CI-082 "Rhinelander" 44-1/2" overall and 36-1/2" double edged high carbon spring steel blade. Has a wood handle with steel S-curve guard and round pommel. Comes with a brown leather scabbard.

 

CI-083 "Henry V steel" 34-1/2" overall with a 27-1/2" double edged high carbon spring steel blade. Has a wood handle with steel guard and pommel. Comes with a leather scabbard.

 

CI-084 "Celtic Sword" Has a 23-1/2" leaf shaped blade of high carbon spring steel and an overall length of 30-1/2". Its anthropomorphic hilt has brass guard, brass pommel and a macassar ebony handle. Comes with a leather scabbard.

 

CI-085 "Agincourt steel" 35-1/2" overall and 27-1/4" double edged high carbon spring steel blade. Has an exotic hardwood handle with steel guard and hex pommel. Comes with a leather scabbard.

 

WS-B11 "Sgain Dubh" 6-1/2" overall with a 3" double edged blade. It is a plain simple looking knife. Comes with a scabbard.

 

WS-H9 "Swept Hilt Rapier" 42" overall and 38" double edged hand forged high carbon spring steel blade. Early 17th century design. Handle is intricately wrapped in twisted steel wire. Pommel and intricate guard are steel. Comes with a leather scabbard.

 

WS-H50 "Swept Hilt Rapier" 43-1/2" overall and 36-1/2" double edged hand forged high carbon spring steel blade. Early 17th century design. Handle is intricately wrapped in twisted steel wire. Pommel and intricate guard are steel. Comes with a leather scabbard.

 

WS-H51 "Main Gauche" 25" overall and 19" double edged hand forged high carbon spring steel blade. Early 17th century design. Handle is intricately wrapped in twisted steel wire. Pommel and guard are steel. Comes with a leather scabbard.

 

WS-H52 "Viking Throwing Axe" 26" overall length. Has a hardwood handle. Does not come with a scabbard.

 

WS-H53 "Bearded Axe" 26" overall length. Has a hardwood handle. Does not come with a scabbard.

 

WS-H58 "Flanged Mace" 22-1/2" overall length. Has a metal shaft, leather grip and a brass tip. Does not come with a scabbard.

 

WS-H59 "War Axe" 27-1/2" overall length. Has a metal shaft and a leather grip. Modeled after a 16th century weapon in a Spanish museum. Does not come with a scabbard.

 

UNITED CUTLERY BLADE DESCRIPTIONS UNITED CUTLERY SPECS/PRICES
   
C.A.S. IBERIA SPECS/PRICES
   
PAKISTAN AND OTHER MISC.
BLADE DESCRIPTIONS
PAKISTAN AND OTHER MISC.
SPECS/PRICES

 

Home